Skip to main content

ProductsSingle-point LiDAR

TFS20-L

TFS20-LMiniaturized Single-Point LiDAR

TFS20-L is an approximately 1.35 g unenclosed single-point module for payload-critical ranging where the host provides mounting and environmental protection.

  • Light Weight
  • Compact Design
  • Strong Resistance To Ambient Light

Key specifications

Measuring range
0.2 ~ 20 m
Frame rate
0 / 20 / 50 / 100 / 250 Hz
Interface
UART,I²C
Protection
without enclosure

Need help confirming a selection or purchase details?

Applications

UAV

UAV

TFS20-L supplies distance in a defined direction to a flight controller or gimbal for assisted height, following or sight-line measurement. Compare update rate, payload, interface and protection, then validate actual ground reflectivity, attitude and speed. Spatial mapping requires suitable spatial data.
Robot Fall Prevention & Obstacle Avoidance

Robot Fall Prevention & Obstacle Avoidance

TFS20-L supplies local ground or obstacle range. Drop-off sensing depends on seeing the ground ahead of the wheels; obstacle sensing depends on target height and stopping margin. Validate placement and speed rather than assuming one sensor covers the whole robot.
Smart Trigger

Smart Trigger

TFS20-L uses distance changes at a defined position as input for opening, waking or presence triggers. Set thresholds, hysteresis and response time against actual targets and backgrounds, selecting point or area coverage to suit the task.

Full specifications

Product technical specifications
ParameterValueParameterValue
Measuring range0.2 ~ 20 mDetecting accuracy± 6 cm (0.2 ~ 6 m), 1% (≥ 6 m)
Frame rate0 / 20 / 50 / 100 / 250 HzInterfaceUART,I²C
Protectionwithout enclosureDimensions21 mm × 15 mm × 7.87 mm
Power consumption≤ 0.43 WWeight~ 1.35 g
Field of view< 2°Output dataSingle-point Distance Value
Operating voltageDC 3.3 ± 9% V

Applicable scope and usage limits

Applicable scenarios

  • Evaluate TFS20-L when a micro-UAV or compact device is sensitive to a few grams and needs more directional range than common short-range modules.
  • The approximately 1.35 g module suits host-provided mounting and protection.

Conditions

  • Confirm the 3.3 V supply, UART/I²C and optical window.
  • Validate usable distance and control margin with dark ground, strong light, attitude changes and motion speed.

Not applicable scenarios

  • For a sensor with its own protective enclosure or native industrial buses, compare TFmini Plus, TF02-Pro or the relevant industrial-interface model.
  • For surrounding contours or complete obstacle coverage, evaluate 2D/3D sensing rather than only adding single-point range.

Short/mid-range sensing: payload, enclosure and cleaning

Filter by real working distance first, then assess host protection, industrial interfaces and window deposits. More range, an enclosure and automatic cleaning address different needs rather than one performance ranking.

View comparison topic
TFS20-LCurrent model

Critical payload limits with host-provided protection

The approximately 1.35 g TFS20-L suits directional ranging on very small platforms where weight and space dominate.

Boundary: The module has no enclosure. Provide host protection and verify working distance on actual targets and in strong light.

View model details
TFmini Plus

Short real distances with compact IP65 protection

Compare TFmini Plus when the task is short-range, about 12 g is acceptable and UART/I²C/I/O fits the controller.

Boundary: Its inclusion here does not make it a 40 m or 50 m candidate. Dusty level-sensing tasks also require window-maintenance comparison.

View model details
TF02-Pro

More distance without an automatic-cleaning requirement

Compare TF02-Pro for more directional range than short-range modules, board interfaces and an IP65 enclosure.

Boundary: For native CAN/RS-485, compare industrial-interface models. For recurring window deposits, compare a self-cleaning model.

View model details
TF02-Pro-W

One material-level point with recurring window deposits

For bins and silos, the selection reason is an integrated cleaning brush and suitable industrial integration to reduce manual window cleaning.

Boundary: Without a cleaning need, weigh the added mass and power. One height is not pile volume, and IP5X does not specify water protection.

View model details
Key parameter comparison
ParameterTFS20-LTFmini PlusTF02-ProTF02-Pro-W
Measuring range0.2 ~ 20 m0.1 ~ 12 m0.1 ~ 40 m0.1 ~ 25 m
Detecting accuracy± 6 cm (0.2 ~ 6 m), 1% (≥ 6 m)± 5 cm @ (0.1 ~ 5 m)± 1% @ (5 ~ 12 m)± 5 cm @ (0.1 ~5 m) ± 1% @(5 ~ 40 m)± 6 cm @ (0.1 ~ 6 m) ± 1% @ (6 ~ 25 m)
Frame rate0 / 20 / 50 / 100 / 250 Hz1 ~ 1000 Hz1 ~ 1000 Hz1 ~ 1000 Hz
InterfaceUART,I²CUART,I/O,I²CUART,I/O,I²CUART、I²C
Protectionwithout enclosureIP65IP65IP5X
Dimensions21 mm × 15 mm × 7.87 mm35 mm × 18.5 mm × 21 mm69 mm × 41.5 mm × 26 mm85 mm × 59 mm × 43 mm
Power consumption≤ 0.43 W550 mW≤ 1 W≤ 2 W
Weight~ 1.35 g12 ± 1 g50 g90 ~ 92 g
Field of view< 2°3.6°3°3°
Operating voltageDC 3.3 ± 9% V5 ± 0.5 V5 ~ 12 VDC 7 ~ 30 V

FAQ

What is the measurement range of the TFS20-L?

The TFS20-L achieves a maximum range of 20 m at 90% reflectivity under low ambient light (0 Klux), dropping to 15 m in bright sunlight (100 Klux). For low-reflectivity targets (10%), the range is 12 m at 0 Klux and 9 m at 100 Klux. Minimum detectable distance is 0.2 m across all conditions.

What communication interfaces does the TFS20-L support?

The TFS20-L supports two communication protocols: UART at 115200 baud (8 data bits, 1 stop bit, no parity) and I²C at up to 400 kbps with slave-mode operation. The I²C default address is 0x10, configurable within the range 0x10–0x7F. Both use 3.3V LVTTL logic levels for direct microcontroller interfacing.

Which tasks suit TFS20-L, and why choose it?

Evaluate TFS20-L when a micro-UAV or compact device is sensitive to a few grams and needs more directional range than common short-range modules. The approximately 1.35 g module suits host-provided mounting and protection.

What are the accuracy and precision specifications?

The TFS20-L delivers ±60 mm (±6 cm) accuracy at 0.2–6 m range, improving to ±1% accuracy beyond 6 m. Precision (1σ repeatability) is 2 cm across the 0.2–6 m range. These specifications assume 25°C indoor conditions and 90% target reflectivity; environmental variation may degrade performance.

What are the operating temperature range and environmental ratings?

The TFS20-L operates from –20°C to +60°C with storage capability to –40°C to +85°C. It resists ambient light up to 100 Klux (equivalent to direct sunlight). However, the datasheet specifies 'N/A' for IP protection rating, meaning no sealed enclosure—not rated for dust or water ingress. Suitable for indoor or sheltered outdoor use only.

What power supply does the TFS20-L require?

The TFS20-L requires DC 3.3 V ±9% (operating range 3.0–3.6 V) with average power consumption ≤0.43 W. Peak current during transmission is 130 mA at 3.3 V. This low power budget makes it compatible with standard 3.3V microcontroller supplies (Arduino, STM32, Raspberry Pi) without dedicated regulators.

What are the physical dimensions and weight?

The TFS20-L measures 21×15×7.87 mm and weighs approximately 1.35 g. It terminates with a 0.8 mm 6-pin connector (Model WF08006-01207), enabling easy integration into compact UAVs, robotic platforms, and handheld devices with minimal mechanical footprint and weight penalty.

When should an alternative to TFS20-L be considered?

For a sensor with its own protective enclosure or native industrial buses, compare TFmini Plus, TF02-Pro or the relevant industrial-interface model. For surrounding contours or complete obstacle coverage, evaluate 2D/3D sensing rather than only adding single-point range. Confirm the 3.3 V supply, UART/I²C and optical window. Validate usable distance and control margin with dark ground, strong light, attitude changes and motion speed. If the project requires functional-safety certification, verify the corresponding evidence separately; Class 1 laser eye safety is not functional-safety certification.

How should TFS20-L be compared with other models or sensing approaches?

TFS20-L is selected primarily for very low mass. TFmini-S and TFmini Plus offer IP65; TF02-Pro offers more specified range and a higher update rate, with different weight and supply requirements. First decide whether the platform can provide its own protection.

What systems can the TFS20-L integrate with?

The TFS20-L is compatible with Arduino, Raspberry Pi, STM32, ESP32, and other 3.3V microcontroller platforms via UART (115200 baud) or I²C (400 kbps) interfaces. It integrates with ROS via standard sensor drivers and autopilot systems like Pixhawk for altitude hold and obstacle avoidance through serial telemetry. PLC systems can interface via RS485 converters using the UART port.

Product inquiry

Talk to a product specialist

Tell us what you need and our team will get back to you.

Product inquiry

Inquiry sent

Your inquiry has been received. We will be in touch soon.