Joshua Merritt uses a Benewake TFmini-S to measure the distance of a vehicle entering his garage, then uses an Arduino Uno to turn those readings into three-color traffic-light signals that guide the car into a fixed parking position.
TFmini-S Arduino garage parking assistant project.The signal changes from green to yellow to solid red, then flashes red when the car moves too close.Garage installation with the TFmini-S sensor and parking signal hardware.Control-side wiring for the TFmini-S, Arduino Uno R3, mode switch and relay module.
Distance-based parking guidance using a TFmini-S LiDAR sensor over UART.